4-2 Enable/disable the Menu/Enter and Cancel button
To enable the Menu/Enter and Cancel button in
the Basic screen, proceed as follow:
12. Keep the
13. Push the 3 indicated keys
simultaneously while keeping the
button pressed.
To disable the Menu/Enter and Cancel button in
the Basic screen, follow the same procedure.
4-3 Description of button operation
<Service Settings>
Service Settings
Test Operation
Maintenance Contact
Field Settings
Min Setpoints Differential
External Input Interlock
Group Address
Return
5. Power-on
CAUTION
● It is not possible to use two remote controllers and the Digital Input Adapter BRP7A* together.
The Digital Input Adapter will not work and will be in an error state when a sub remote
controller is detected.
● When controlling one indoor unit with two remote controllers, one remote controller needs to
be set as the main remote controller and one as the sub remote controller.
This selection needs to be made once during start up and can be changed afterwards in the
Service Settings menu.
● Check that the indoor/outdoor unit wiring is completed.
● Check that the switchbox cover of the indoor and outdoor units are closed before powering on.
BRC2E52C7 / BRC3E52C7
–
4P368041-1
2014.02
button pressed.
1/3
Setting
Highlighted display (selected items)
Instructions for manipulating
the buttons will appear.
Power-on
1
2
2
2
2
Installation manual
12