Daikin BRC2E52C7 Installation Manual page 15

5-8
When the display is changed from
Main RC to Sub RC, the setting is
completed
NOTE
If the Basic screen is not displayed more than 2 minutes
after the "Sub RC" display, turn off the power and check
the wiring.
5-9
The Basic screen is displayed.
CAUTION
It's only possible to use a main and a sub remote controller of the same type. The BRC2E and
BRC3E model are the same type and can only be used with each other.
NOTE
● When selecting a different language, refer to
● The following functions cannot be set in the sub remote controller.
Set them in the main remote controller:
• Individual Airflow Direction
• "Auto" operation mode (switches to cooling or heating)
• Energy Saving Options
• Schedule
• Service Settings (only Test Operation, Maintenance Contact and Switch Main Sub
Controller are available).
BRC2E52C7 / BRC3E52C7
–
4P368041-1 2014.02
<Basic screen>
5-9
"12. Language"
5-8
Checking the connection.
Please stand by.
Sub RC
<Basic screen>
5-9
on page 27.
Installation manual
Power-on
14