Daikin BRC2E52C7 Installation Manual page 35

16-4
Select "B2 Delay Timer", "B2 Reset
Timer", "Reset On/Off", "Reset Mode",
"Reset Cool SP" or "Reset Heat SP"
by using the
and change the settings by using the
(Up/ Down) buttons.
16-5
Press the Menu/Enter button. The
confirmation screen is displayed.
16-6
Select Yes and press the Menu/
Enter button. The settings are
entered and the Service Settings
menu returns.
16-7
Disable the Menu/Enter button when
no other settings need to be changed.
To disable, refer to
disable the Menu/Enter and Cancel
button" on page
Parameter
B2 Delay Timer
B2 Reset Timer
Reset On/Off
Reset Mode
Reset Cool SP
Reset Heat SP
NOTE
● When a parameter is "--", this means that nothing will be changed for this parameter and the
current active value is kept.
BRC2E52C7 / BRC3E52C7
–
4P368041-1 2014.02
(Left/Right) buttons
"4-2 Enable/
12.
Explanation
Timer that starts after removing the Key
Card. As long as this timer does not
expire, the unit continues to operate
normally.
Timer that starts when Delay Timer has
expired. When this timer expires, the
previous state changes to the "Default
Reset Setting" state.
"Default Reset Setting" On/Off state.
"Default Reset Setting" operation mode.
"Default Reset Setting" cooling setpoint.
"Default Reset Setting" heating setpoint.
16-4
External Input Interlock
B2 Delay Timer :1min
16-5
B2 Reset Timer :20hrs
Reset On/Off :OFF
Reset Mode :--
Reset Cool SP :22°C
Reset Heat SP
:22°C
Return Setting
16-6
External Input Interlock
16-7 Save the settings?
Yes No
Return Setting
<Service Settings>
Possible values
0 - 10 minutes
0 – 20 hours
"ON", "OFF", "--"
"Auto", "Cool", "Heat",
"Fan", "--"
See indoor unit's
setpoint range and
setpoint range
limitation, "--".
See indoor unit's
setpoint range and
setpoint range
limitation, "--".
External Input Interlock Function
Press the Menu/Enter
button.
Press the Menu/Enter
button.
Default value
"1 min"
"20 hrs"
"OFF"
"--"
"22°C"
"22°C"
Installation manual
34