Power-on
If one indoor unit is controlled by a remote controller
5-1
Turn on the power.
5-2
"Checking the connection
Please stand by" is displayed.
5-3
The Basic screen is displayed.
If one indoor unit is controlled by 2 remote controllers
5-4
Put on the power.
5-5
"Checking the connection
Please stand by" is displayed.
5-6
If the sub remote controller is not
set when powering on when one
indoor unit is controlled by two
remote controllers, "Error code:
U5" is displayed in the connection
checking screen.
5-7
Select the sub remote controller
by pressing the Operation Mode
Selector button of either one of
the remote controllers for
4 seconds or longer.
Installation manual
13
<Main remote controller>
5-2
Checking the connection.
Please stand by.
Main RC
<Basic screen>
5-3
<Main remote controller>
5-5
Checking the connection.
Please stand by.
Main RC
NOTE
When the above text is displayed, the backlight
does not light up when one of the buttons is
pressed.
5-6
Error Code U5
Checking the connection.
Please stand by.
Main RC
NOTE
When the text on the
left is displayed, the
backlight does not
light up when one of
the buttons is pressed.
<Sub remote controller>
5-5
Checking the connection.
Please stand by.
Main RC
5-6
Error Code U5
5-7
Checking the connection.
Please stand by.
Main RC
Press and hold the
Operation mode selector
button of the sub remote
controller for 4 seconds or
longer.
BRC2E52C7 / BRC3E52C7
–
4P368041-1
2014.02