Installing A 2.5-Inch Hot Swappable Hard Drive Blank - Dell PowerEdge R330 Owner's Manual

Figure 19. Removing and installing a 2.5-inch hard drive blank
1. hard drive blank
Next steps
If removed, install the front bezel.
Related Tasks
Removing the optional front bezel
Installing the optional front bezel

Installing a 2.5-inch hot swappable hard drive blank

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you follow the
2. If installed, remove the front bezel.
Steps
Insert the hard drive blank into the hard drive slot until the release button clicks into place.
Next steps
If applicable, install the front bezel.
Related Tasks
Removing the optional front bezel
Installing the optional front bezel
Safety instructions.
2. release button
61