Dell PowerEdge R330 Owner's Manual page 93

Figure 38. Removing and installing the iDRAC port card
1. screw
3. iDRAC port card board
5. tabs on the iDRAC port
7. iDRAC port card connector
Next steps
1. Install the iDRAC port card.
2. Install the cooling shroud.
3. If disconnected, reconnect the network cable.
4. Follow the procedure listed in
Related Tasks
Removing the cooling shroud
Installing the optional iDRAC port card
Installing the cooling shroud
After working inside your
2. iDRAC port
4. SD vFlash media card slot
6. slots on the chassis
8. iDRAC port card holder
system.
93