Installing The System Cover - Dell PowerEdge R330 Owner's Manual

3. Hold the cover on both sides, and lift the cover away from the system.
Figure 10. Removing and installing the system cover
1. latch release lock
3. system cover
Next steps
Install the system cover.
Related Tasks
Removing the optional front bezel

Installing the system cover

Installing the system cover
Prerequisites
Ensure that you follow the
Steps
1. Align the slots of the system cover with the tabs on the chassis.
2. Push the system cover latch down to move the system cover into the closed position.
The system cover slides forward and the tabs on the system cover engage with the slots on the
chassis. The system cover latch locks into place when the system cover engages with the slots on
the chassis.
3. Turn the cover latch release lock clockwise to the locked position.
Safety instructions.
2. latch
47