Re-Enabling The Tpm For Bitlocker Users; Re-Enabling The Tpm For Txt Users - Dell PowerEdge R330 Owner's Manual

4. Press the plastic bolt until the bolt snaps into place.
Figure 61. Installing the TPM
1. TPM
3. slot on the TPM connector
5. slot on the system board
Next steps
1. Install the system board.
2. Follow the procedure listed in
Related Tasks
Installing the system board

Re-enabling the TPM for BitLocker users

Initialize the TPM.
For more information about initializing the TPM, see http://technet.microsoft.com/en-us/library/
cc753140.aspx.
The TPM Status changes to Enabled, Activated.

Re-enabling the TPM for TXT users

1. While booting your system, press F2 to enter System Setup.
2. In the System Setup Main Menu, click System BIOS → System Security Settings.
3. In the TPM Security option, select On with Pre-boot Measurements.
4. In the TPM Command option, select Activate.
After working inside your
2. TPM connector
4. plastic bolt
system.
127