Expansion Cards And Expansion Card Riser; Expansion Card Installation Guidelines - Dell PowerEdge R330 Owner's Manual

Hide thumbs Also See for PowerEdge R330:
Table of Contents

Advertisement

Figure 32. Replacing the internal USB key
1.
USB memory key
Next steps
1.
Install the expansion card riser.
2.
Follow the procedure listed in
3.
While booting, press F2 to enter System Setup and verify that the system detects the USB key.
Related Tasks
Removing the expansion card riser
Installing the expansion card riser

Expansion cards and expansion card riser

NOTE: A System Event Log (SEL) is logged if an expansion card riser is unsupported or missing. It
does not prevent your system from turning on and no BIOS POST message or F1/F2 pause is
displayed.
NOTE: The expansion card riser is optional for systems with four hard drives.

Expansion card installation guidelines

Your system supports PCIe Express Generation 3 cards. The following table provides riser configurations
for R330 systems:
After working inside your
2.
USB memory key connector
system.
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents