Removing The Optional Front Bezel; System Cover; Removing The System Cover - Dell PowerEdge R330 Owner's Manual

Figure 9. Removing and installing the optional front bezel
1. release latch
3. front bezel

Removing the optional front bezel

1. Unlock the keylock at the left end of the bezel.
2. Lift the release latch next to the keylock.
3. Rotate the left end of the bezel away from the front panel.
4. Unhook the right end of the bezel and pull the bezel away from the system.

System cover

Removing the system cover

Prerequisites
1. Ensure that you follow the
2. Turn off the system, including any attached peripherals.
3. Disconnect the system from the electrical outlet and peripherals.
4. If installed, remove the front bezel.
Steps
1. Turn the latch release lock to the unlock position.
2. Lift the latch and rotate the latch toward the back of the system.
The system cover slides back, disengaging the tabs on the system cover from the slots on the
chassis.
46
Safety instructions.
2. keylock