Programmable Functions Of Led Display - PowerTech KIT PL600 Manual

● F3 function settings:
Logic F3-1
Gate Status
Closed
Open
Stop during moving
Closing
Opening
Logic F3-2
Gate Status
Closed
Open
Stop during moving
Closing
Opening
Logic F3-3
Gate Status
Closed
Open
Stop during moving
Closing
Opening

4.2.1 Programmable Functions of LED Display

LED Display
"N-L": The PL600 system learning is not done.
"RUN": The PL600 system is in normal performing.
"LEA": Enter learning mode and then wait for learning instructions.
The operation of gate learning:
(1). Press "SET" one time; then press "SET" + "DOWN" for 3seconds, and the LED display
shows "LEA" ; and then press the transmitter (A) button one time. After 1~3seconds, the LED
display shows "ARN"
"ARN": The system learning is in progress.
The Auto-learning process of gate moving: "Gate open to the end- stop close to the end- stop.
The reactions of the photocells when detecting obstacles
Photocell 2 Photocell 1
Stop opening No effect
No effect
Stop opening
No effect
Closes the leaf No effect
The reactions of the safety edge/ photocell when detecting obstacles
Safety Edge
Stop opening
Stop opening/ closing
Reverses to open for 2 seconds
Reverses to close for 2 seconds
The reactions of the loop detector/ photocell when detecting obstacles
Loop Detector
Open
Open
Open
Open
Reloads automatic closing time
Reloads automatic closing time
Open Locks and, on release, reverses to open
Locks and, on release, continues opening
Reloads automatic closing time
Reloads automatic closing time
Reloads automatic closing time
Reloads automatic closing time
Programmable Functions
Photocell 1/ Photocell 2
Stop opening
Photocell 1
No effect
Open
No effect
Photocell 1
No effect
Open
No effect
INSTRUCTIONS PL600/PL1000
19