SecurityMan DIGILCDNDVRB Quick Start Manual

Hide thumbs Also See for DIGILCDNDVRB:

Step 1 HARDWARE

Power Button

Insert Included

8GB SD Card

(supports up to 32GB)

Connect the Power

Adapter

Step 2 INSTALL APP & SCAN QR CODE

Open the App Store on your mobile device. Then search for and install the "WatchBot" application developed by "Long Xu". Once installed, tap on the

"WatchBot" icon (Fig. 2.1), select "+" to add a new device (Fig. 2.2) and then select the "Scan" option (Fig. 2.3).

Fig2.1

Extend the Antenna

Attach the Antenna

Connect the Ethernet

Cable to your Router

Fig2.2

Connect the Power

Fig2.3

Table of Contents

Do you have a question about the DIGILCDNDVRB and is the answer not in the manual?

Page 1 DIGILCDNDVRB Quick Start Guide (iPhone) The SecurityMan DIGILCDNDVRB is designed for quick and easy installation. This guide will help you get your system connected to your mobile device in 2 easy steps. Step 1 HARDWARE Power Button Extend the Antenna...
Page 2 Aim your camera at the QR Code located on the bottom of the dock station (Fig. 2.4) so that the app can capture your Device ID. Create a System name (Fig. 2.5) and enter the Device Password that is associated with your system (Fig. 2.6). NOTE: The default password is 222222.
Page 3 DIGILCDNDVRB Quick Start Guide (Android) The SecurityMan DIGILCDNDVRB is designed for quick and easy installation. This guide will help you get your system connected to your mobile device in 2 easy steps. Step 1 HARDWARE Power Button Extend the Antenna...
Page 4 Aim your camera at the QR Code located on the bottom of the dock station (Fig. 2.4) so that the app can capture your Device ID. Create a System name (Fig. 2.5) and enter the Device Password that is associated with your system (Fig. 2.6). NOTE: The default password is 222222.