ENHANCED VISION merlin LCD User Manual page 8

to Move Merlin lcD to another location
• If you are repositioning Merlin LCD a short distance across a
desk or table, make sure you do not pull on any power cords or
connector cables.
• Disconnect and secure all power and video cables and lock the
X-Y table before moving the unit.
• Carry Merlin LCD only by the two recessed handles located on
either side of its base. Do not carry it by the lcD monitor arm.
caring for Merlin lcD
• Always turn the power OFF for the Merlin LCD and the monitor
when the system is not in use.
• Always turn the power OFF before cleaning Merlin LCD.
• The protective glass covering the camera can be cleaned as
needed with the lens cloth provided within the packaging.
Susceptibility to interference:
• There may be temporary degradation of the image when the
Merlin LCD is subjected to a strong radio frequency field, electro-
static discharge or transient electrical noise. An electro-static
discharge (caused by static electricity) may cause the screen to
go black. If this happens, switch the unit off and on again.
compliance Warnings:
• Electromagnetic compatibility: The use of accessories and
cables other than those specified by Enhanced Vision may result
in increased emissions or decreased immunity.
• Placement of equipment: The Merlin LCD should not be used
adjacent to or stacked with other equipment.
7
s C
aFety and are