Appendix B: Faq - Planet Networking & Communication VIP-193 User Manual

Appendix B: FAQ

Q1: There are no signal
A: 1. Check if there is any available AP.
2. Check if AP is set correctly.
3. Check if AP settings (SSID, WEP and key) of WLAN phone are correct.
Q2: Nothing is displayed on the LCD screen
A: Check if battery is run out of power.
Q3: Why can't I dial my friend's SIP number?
A: 1. Check Registrar Server Domain Name/IP address and Outbound Proxy Domain Name/IP Address (under SIP Settings in
Configuration Menu). Make sure you have the right Name or IP Address.
2. Check the LCD display on user's phone to see if there is a name or number displayed on the screen. If the name or number is
not displayed, use a web browser and access the configuration menu. Make sure that the Registrar Server Domain Name/IP
Address is correct.
3. Check the register status under SIP Account Settings in the configuration menu (from web browser). If your status is
unregistered, it means user do not have a SIP account. Contact SIP service provider to get an account.
Q4: If forgot the login password, how to reset to factory default settings?
A: 1. If forgot the User level password, to login keypad menu by Admin mode, and entry "Menu -> Phone Settings -> Factory
Default" menu to reset User level password.
2. If forgot the Admin level password, please power off the machine then power on again. When the Power LED to show blue
color, press the "1, 9, 0" digits together and hold about 1 minute until Power LED to glisten with red color.
The Wi-Fi Phone will run to work factory default, and wait for returning to normal main screen.
Q5: What is "LCD Test" function? It will appear when login by Admin mode.
A: The LCD Test function is for machine test by production technical personnel, and don't suggest carrying out this
function.
73
Appendix B: FAQ