Setting Up The Wi-Fi Phone - Planet Networking & Communication VIP-193 User Manual

Setting up the Wi-Fi Phone

Before you begin, make sure your network has an active Internet connection.
1. Press and hold the Power button for two seconds.
2. The Wi-Fi Phone will boot up and automatically scan for wireless networks.
3. A list of wireless networks will be displayed and show their wireless network names (also known as Service Set
Identifier or SSID), security status (a lock indicates wireless security), and signal strength, which is indicated by a bar
graph.
Scroll through the network choices, and press the center selection key (in the middle of the navigation pad)
to select the wireless network you want to use.
If the network you want is not shown, select Rescan for a new scan.
11
Chapter 3: Installing and Using the Wi-Fi Phone
Figure 3-6: Scan for
Wireless Networks
Figure 3-7: Select Wireless
Network