How To Access The Web-Based Utility; Administrator Access - Planet Networking & Communication VIP-193 User Manual

Overview
For your convenience, you can configure your Wi-Fi Phone either on the Wi-Fi Phone or you can use the Web-based
utility provided. The Web-based utility is available to both users and administrators of the Wi-Fi Phone. NOTE: User
has limited access to Internet Telephony Service Provider (ITSP)-related configuration. You will need administrators
access to access all settings.

How to Access the Web-based Utility

First, you need the Wi-Fi Phone's IP address. Use your Wi-Fi Phone to access the IP address. From the
main Menu on the Wi-Fi Phone, select Information and press the center selection key. The IP address
is listed here.
To access the Web-based utility of the Wi-Fi Phone, from your PC, launch any Internet browser. In the
Address field, enter http:// and then the phone's IP address. Press the Enter key.
To login as a user, the Login screen appears and asks you for your User Name and Password. Enter
"user" in the User field. The default password is "0000". Click the Login button.
To login as an administrator, from the Login screen, enter "admin" for username and your admin
password. Click the Login button.
NOTE: The default Admin password is "WL800ADM", but may have changed if you have an ITSP.

Administrator Access

Most settings on the Wi-Fi Phone are for the end user. However, there are some settings that require
administrator privileges. For more information, please see the section of this user guide for administrators.
29
Chapter 4: Configuring the Wi-Fi Phone
Internet Telephony
Service Provider (ITSP):
A
company that provides voice
over Internet protocol services.