Planet Networking & Communication VIP-193 User Manual page 19

4. The Wi-Fi Phone will automatically connect to the network you have selected.
If WEP security is enabled on the selected network, a new screen will appear. Using the navigation
pad, select the appropriate transmit key number and then move to the WEP Key field. Enter the
network's WEP key. Press the center selection key.
If WPA security is enabled on the selected network, a new screen will appear. Enter the
network's WPA key. Press the center selection key.
5. You will be notified when the Wi-Fi Phone has connected to the network, and a checkmark
will appear next to the name of the network.
Select Exit.
If you are NOT an administrator, please proceed to the next section.
If you are an administrator, you will need Administrator access to set up SIP settings. If
you do not have Admin access, please refer to the chapter "For Administrators Only".
Chapter 3: Installing and Using the Wi-Fi Phone
Figure 3-8: Connect to Figure 3-9: Enter WEP
Wireless Network Key (Secured Network)
Figure 3-11: Successful
Figure 3-10: Enter WPA
Key (Secured Network)
Connection
12