Figure 4-65: Set User Password - Planet Networking & Communication VIP-193 User Manual

To enable the user password for the Wi-Fi Phone
Press the left soft key to select the Phone Password setting. Press the Edit key to display Yes.
To set a new password, navigate to Password and select Edit. Enter your new password and press
the center selection key to save the new password. Press Exit if you do not want to change the
password.
The next time the Wi-Fi Phone is powered on, it will ask for the Phone Password. Enter your
user password in the field provided, and then select OK.
To access administrator mode to the Wi-Fi Phone
Some settings used by your Internet Telephony Service Provider (ITSP) require administrator
privileges.
To gain administrator access, first enable the user password (see above). Reboot the Wi-Fi Phone. When
you power the phone back on, the User password field displays. Press and hold the Call button for 3
seconds. The Admin password field displays. Enter your Admin password, and then select OK.
NOTE: The default Admin password is "WL800ADM", but may have changed by your ITSP.
52
Chapter 4: Configuring the Wi-Fi Phone
Figure 4-65: Set User
Password
Figure 4-67: Phone
Password (Admin)
Figure 4-66: User
Phone Password