Regency Fireplace Products F2400M Owners And Installation Manual
Hide thumbs
Also See for F2400M:
- Owners & installation manual (28 pages) ,
- Owners & installation manual (28 pages)
Table of Contents
Advertisement
Quick Links
Owners &
Freestanding Woodstove
Installation Manual
F2400 Video
www.regency-fire.com
MODELS:
F2400M
S2400M
Tested by:
Installer: Please complete the details on the back cover
and leave this manual with the homeowner.
Homeowner: Please keep these instructions for future reference.
919-542
FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4
05.15.15
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Regency Fireplace Products F2400M
Summary of Contents for Regency Fireplace Products F2400M
- Page 1 Owners & Freestanding Woodstove Installation Manual F2400 Video www.regency-fire.com MODELS: F2400M S2400M Tested by: Installer: Please complete the details on the back cover and leave this manual with the homeowner. Homeowner: Please keep these instructions for future reference. 919-542 FPI FIREPLACE PRODUCTS INTERNATIONAL LTD. 6988 Venture St., Delta, BC Canada, V4G 1H4...
- Page 2 Thank-you for purchasing a REGENCY FIREPLACE PRODUCT. The pride of workmanship that goes into each of our products will give you years of trouble-free enjoyment. Should you have any questions about your product that are not covered in this manual, please contact the REGENCY DEALER in your area. Keep those REGENCY FIRES burning. “This wood heater has a manufacturer set minimum low burn rate that must not be altered.
- Page 3 Modular Parts F2400 Video Regency 2400 Freestanding Woodstove...
-
Page 4: Table Of Contents
Glass Maintenance ............25 Mobile Home Installation ..........17 Wood Storage ..............25 Listed Components For Mobile Home F2400m Stove Main Assembly w/classic door ....26 Installation ..............18 F2400m Stove Main Assembly w/contemporary door .27 Flue Baffle & Secondary Air Tube Installation .....18 S2400m Step Stove Main Assembly w/classic door ..28... -
Page 5: Safety Label For F2400M
REPORT NO:219-S-02-2 RESIDENTIAL INSTALLATION USING RESIDENTIAL INSTALLATION USING SINGLE WALL CONNECTOR SINGLE WALL CONNECTOR THE F2400M MEETS UL737 STANDARD FOR FIREPLACE STOVES WHEN A FIRESCREEN IS PROVIDED. SIDEWALL A 457 mm / 18 in D 762 mm / 30 in SIDEWALL... -
Page 6: Safety Label For S2400M
safety decal NOTE: Regency units are constantly being This is a copy of the label that accompanies improved. Check the label on the unit and if each Regency Medium Freestanding Step there is a difference, the label on the unit is the Stove (S2400M). -
Page 7: F2400M Unit Dimensions
F2400M UNIT DIMENSIONS Contemporary Door Classic Door Regency 2400 Freestanding Woodstove... -
Page 8: S2400M Unit Dimensions
dimensions S2400M UNIT DIMENSIONS Contemporary Door Classic Door Regency 2400 Freestanding Woodstove... -
Page 9: Residential Installation
MODULAR INSTALLATION OPTIONS The following items are required when assembling your Regency Stove. F2400M unit - the Rear Heat Deflector is supplied with the stove, but if you choose not to use it you must use the Airmate instead. -
Page 10: Room Air
Check with your local inspector. Residential Installation “C” Vent (Single Wall) Unit From Unit From Corner From Flue Center-Line Medium F2400M with Airmate 16" (406 mm) 11" (279 mm) 6" (152 mm) 28" (710 mm) 17.5" (444 mm) 17.5" (444 mm) with Rear Deflector 18"... -
Page 11: Floor Protection
Min. Min.Hearth Unit Unit Center-line Width to Rear Wall Medium F2400M with Airmate 15" (381 mm) 5.5" (139 mm) 27" (685 mm) 12" (304 mm) 54" (1371 mm) 48" (1219 mm) with Rear Deflector 15" (381 mm) 6.5" (165 mm) 27"... -
Page 12: Stove Assembly Prior To Installation
The rear heat deflector is supplied with the stove 1) For easier assembly, tip the stove on its back tached to the base. The F2400M stove requires and must be installed unless the optional airmate (onto a soft surface to prevent scratching). -
Page 13: Step-By-Step Chimney And Connector Installation
STEP-BY-STEP Leg and Bottom Shield Assembly 8) To complete your chimney installation, install the double wall connector pipe from the F2400M & S2400M CHIMNEY AND stove’s flue collar to the chimney support CONNECTOR device. Bottom Shield 020-911 INSTALLATION 9) If you are using a horizontal connector,... -
Page 14: Masonry Chimney
installation MASONRY CHIMNEY Ensure that a masonry chimney meets the mini- mum standards of the National Fire Protection Association (NFPA) by having it inspected by a professional. Make sure there are no cracks, loose mortar or other signs of deterioration and blockage. -
Page 15: Combustible Wall Chimney Connector Pass-Throughs
installation COMBUSTIBLE WALL CHIMNEY CONNECTOR PASS-THROUGHS Method A: 12" (304.8 mm) Clearance to Combustible Wall Minimum chimney clearance to brick Member: and combustibles 2 in. (50.8mm) Using a minimum thickness 3.5" (89 mm) brick and a 5/8" (15.9 mm) Minimum clearance minimum wall thickness clay liner, construct a wall pass-through. -
Page 16: Recommended Heights For Woodstove Flue
installation RECOMMENDED HEIGHTS FOR WOODSTOVE FLUE Draft is the force which moves air from the appliance up through the chimney. The amount of draft in your chimney depends on the length of the chimney, local geography, nearby obstructions and other factors. Too much draft may cause excessive temperatures in the appliance and may cause damage. An uncontrol- lable burn or excessive temperature indicates excessive draft. -
Page 17: Mobile Home Installation
installation MOBILE HOME INSTALLATION In addition to standard installation instructions Once you have properly marked the position of the following requirements are mandatory for your unit and the floor protection as outlined in the Residential Installation items #1 through #8, installation in a mobile home. -
Page 18: Listed Components For Mobile Home Installation
ICC EXCEL 2100 tap it into place with a hammer. A tighter fit The Regency F2400M and S2400M Freestand- Qty.Part # Description will ensure the tube will not move when the... -
Page 19: Stainless Steel Smoke Deflector Adjustment / Replacement
installation STAINLESS STEEL SMOKE DEFLECTOR ADJUSTMENT / REPLACEMENT The stainless smoke deflector is located in the upper front area of the firebox. The deflector is held in place with 2 bolts Prior to the first fire, ensure deflector is seated properly and secured with 2 hand tightened bolts. Smoke deflector installed with 2 bolts. -
Page 20: Brick Installation
installation STEP-BY-STEP BRICK INSTALLATION The cool to touch door handle is designed to be inserted from the bottom up and slide off when OPTIONAL not held in place. Once in position, the door can Firebrick is included to extend the life of your stove ACCESSORIES be opened. -
Page 21: Screen Door
installation Blower/Fan (846-515) 4) Push the ash plug into the hole inside the firebox and replace all the bricks except for the brick over the ash plug (see brick diagram 1) Remove the two screws from the top of the fan in the Brick Installation section). -
Page 22: Seasoned Wood
operating instructions SEASONED WOOD Whether you burn wood in a fireplace, stove or insert, good quality firewood is the key to convenience, efficiency and safety. Wet wood and pieces that are not the right size and shape for your wood burner can be frustrating, burn inefficiently and deposit creosote that can fuel a dangerous chimney fire. Good planning, seasoning and storage of the firewood supply are essential to successful wood burning. -
Page 23: Operating Instructions
operating instructions OPERATING FIRST FIRE 11) Some cracking and popping noises may be INSTRUCTIONS experienced during the heating up process. When your installation is completed and inspected These noises will be minimal when your unit you are ready for your first fire. With your unit now correctly installed and safety reaches temperature. -
Page 24: Fan Operation
operating instructions FAN OPERATION 2) Always leave 1/2 to 1 inch of ash in the bottom draft control. Over firing can cause extensive of the firebox. This helps in easier starting and damage to your stove including warpage and a more uniform burn of your fire. Replace ash premature steel corrosion. -
Page 25: Maintenance
maintenance MAINTENANCE 5) The chimney and chimney connector should LATCH ADJUSTMENT be inspected at least once every two months during the heating season to determine is a It is very important to carefully maintain your The door latch may require adjustment as the creosote buildup has occured. -
Page 26: F2400M Stove Main Assembly W/Classic Door
846-920 Glass Retainer Clips/Screws (8/set) 910-157/P Fan/Blower Motor (120 V) Screw - 1/4 - 20 x 3/8" 033-953 Air Tube - 3/4" F2400M (Qty: 4) (each) 948-170/P Small Glass Retainer F2400M 020-957 Baffle (set) F2400M 020-363 Left Side Heat Shield... -
Page 27: F2400M Stove Main Assembly W/Contemporary Door
Fan Speed Switch HI/OFF/LOW (3-way) 948-170/P Small Glass Retainer F2400M 910-157/P Fan/Blower Motor (120 V) 020-363 Left Side Heat Shield 033-953 Air Tube - 3/4" F2400M (Qty: 4) (each) 020-364 Right Side Heat Shield 020-957 Baffle (set) F2400M 846-975 Door Handle Assembly 815-557... -
Page 28: S2400M Step Stove Main Assembly W/Classic Door
parts list S2400M STEP STOVE MAIN ASSEMBLY W/CLASSIC DOOR Part# Description Part# Description 850-141 Door Assy - Black 846-515 Complete Fan/Blower Assy (120 V) 850-143 Door Assy - Nickel Accent 910-684 Power Cord (120 V) 910-142 Thermodisc Fan Auto ON/OFF 846-302 Glass - Replacement - S2400M 910-138... -
Page 29: S2400M Step Stove Main Assembly W/Contemporary Door
parts list S2400M STEP STOVE MAIN ASSEMBLY W/CONTEMPORARY DOOR Part# Description Part# Description 850-161 Door Assy 846-515 Complete Fan/Blower Assy (120 V) 846-302 Glass - Replacement - S2400M 910-684 Power Cord (120 V) 936-243 7/8" Adhesive Tape Gasket 910-142 Thermodisc Fan Auto ON/OFF 846-920 Glass Retainer Clips /Screws(8/set) 910-138... -
Page 30: Pedestal, Bottom Shield & Leg Options
parts list PEDESTAL, BOTTOM SHIELD & LEG OPTIONS Part# Description 020-925 Pedestal - Medium 904-257 Large Magnet Catch Knockout - Pedestal 850-100 Ashdrawer Kit - Pedestal Ashdrawer - Pedestal Ashdrawer Lid Assy 942-110 Ash Plug 820-249 Ash Plug Tool Handle 020-911 Bottom Shield - Medium Blanking Plate - Btm Shield... -
Page 31: Firebrick
parts list FIREBRICK Part# Description 020-960 Brick Set - Complete 902-111 Brick - Regular Full Size: 1-1/4" x 4-1/2" x 9" Brick Partial: 1-1/4" x 4-1/2" x 3-1/2" Brick Partial: 1-1/4" x 4-1/2" x 2" Brick Partial: 1-1/4" x 2" x 9" Regency 2400 Freestanding Woodstove... - Page 32 notes 32 | Regency 2400 Freestanding Woodstove...
- Page 33 notes Regency 2400 Freestanding Woodstove...
- Page 34 notes 34 | Regency 2400 Freestanding Woodstove...
-
Page 35: Warranty
For Model: F1100 F3100 S3100 H2100 I1100 I3100 F2400 warranty S2400 I2400 Z2510 FP90 Regency Fireplace Products are designed with reliability and simplicity in mind. In addition, our internal Quality Assurance Team carefully inspects each unit thoroughly before it leaves our door. FPI Fireplace Products International Ltd. - Page 36 Register your Regency warranty online ® www.regency-fire.com Reasons to register your product online today! • View and modify a list of all your registered products. • Request automatic email notification of new product updates. • Stay informed about the current promotions, events, and special offers on related products.
Need help?
Do you have a question about the F2400M and is the answer not in the manual?
Questions and answers