Rack Model - MGE UPS Systems Pulsar EX 1000 Installation And User Manual

4. Maintenance

Rack model

Removal of battery module
A - Remove the two screws securing the door.
B - Slide the door open and remove it.
C - Unscrew the bar that holds the battery module in place.
D - Remove the bar.
E - Disconnect the battery module.
F - Remove the battery module.
B
Reinstallation of the battery module
Carry out the above operation in reverse order.
To maintain an identical level of performance and safety, use a battery module identical to that previously mounted in the
UPS.
Press the two parts of the battery connector tightly together to ensure proper connection.
Page 24 -
51031604EN/AB
A
D
C
E
F