MGE UPS Systems EPS 6000 User Manual page 69

Ups shared systems

Hide thumbs Also See for EPS 6000:

Table of Contents

This message indicates that a fan has failed, and that service is required. Because the

fans of the rectiﬁer/battery charger and the inverter are redundant, the load is still

supplied by the inverter.

This message indicates that there is a fault in an auxiliary cabinet, and that service is required.

This message indicates that the battery may have reached its end of life (based on the rated

lifetime and the conditions of use).

This message indicates that the core controller of the selected module (UPS module or SSC,

see Section 2.2.2) is not sending data to the alphanumeric display. The status of the module

is still correctly indicated by the LEDs of the visible panel (see Section 2.2.1) and the hidden

panel (see Section 2.2.3).

This message indicates that the core controller of the selected module (UPS module or SSC,

see Section 2.2.2) is sending invalid data to the alphanumeric display. The status of the

module is still correctly indicated by the LEDs of the visible panel (see Section 2.2.1) and the

hidden panel (see Section 2.2.3).

This message indicates that the alphanumeric display is not operating properly. The status of

the UPS module or SSC is still correctly indicated by the LEDs of the visible panel (see

Section 2.2.1) and the hidden panel (see Section 2.2.3).

FAN FAILURE

CALL SERVICE

AUXILIARY CABINET FAULT

CALL SERVICE

CALL SERVICE FOR

BATTERY PM

MODULE NUMBER X

UNAVAILABLE

MODULE NUMBER X

FAULT

DISPLAY NUMBER X

UNAVAILABLE

Operation

User's guide

2 — 43

Table of Contents