Technical Data; Electromagnetic Compatibility (Emc); Physical Set-Up; F Ig. 4-1: Physical Set - Addi-Data PC104-PLUS1500 Technical Description

Digital i/o board, optically isolated
Table of Contents

Advertisement

PC104-PLUS1500
4

TECHNICAL DATA

4.1

Electromagnetic compatibility (EMC)

The PC is to comply with the norm IEC61326 for measurement, control and
laboratory use and with the specifications for EMC protection.
The board has been subjected to EMC tests in an accredited laboratory. The board
complies with the limit values set by the norms IEC61326 as follows:
ESD (Discharge by contact/air) ................. 4/8 kV
Fields .......................................................... 10 V/m
Burst ........................................................... 4 kV
Conducted radio interferences ................... 10 V
4.2

Physical set-up

IMPORTANT!
i
When inserting the board into the system, please insert firstly
the PCI boards and then additional ISA boards.
The following figure (
inserted into a system. Furthermore the example show additionally inserted
boards.
Weight: ...................................................... 92 g
Installation in: ........................................... PC/104-Plus system with PCI slot
Connection to the peripheral: ..................... 40-pin male connector
True value
F ig. 4-1) shows how the board PC104-PLUS1500 is
1 0 3 H
Fig. 4-1: Physical set-up
Set value
4/8 kV
10 V/m
2 kV
10 V
(2-rows, 2.54 mm pattern)
Technical data
11

Advertisement

Table of Contents
loading

Table of Contents