Technical Data; Electromagnetic Compatibility (Emc); Physical Set-Up Of The Board - Addi-Data ADDICOM APCI-7300 Technical Description

Technical data

4 TECHNICAL DATA
4.1

Electromagnetic compatibility (EMC)

The board has been subjected to EMC tests in an accredited laboratory. The
board complies with the limit values set by the norms IEC61326 as follows:
ESD (Discharge by contact/air) ................. 4/8 kV
Fields .......................................................... 10 V/m
Burst ........................................................... 4 kV
Conducted radio interferences ................... 10 V
Noise emissions..........................................
4.2

Physical set-up of the board

The board is assembled on a 4-layer printed circuit card.
Dimensions:
99 mm
Weight: ...................................................... approx. 160 g
Installation in: ........................................... 32/64-bit PCI slot 5 V
Connection to the peripheral:
APCI-7300: ............................................... 9-pin SUB-D male connector
APCI-7420: ............................................... 2 x 9-pin SUB-D male connector
APCI-7500: ............................................... 37-pin SUB-D male connector
14
175 mm
True value
B class
APCI-7xxx
Set value
4/8 kV
10 V/m
2 kV
10 V