Archiving; Figure 51 - Backup Screen - ADEMCO AHDR1 User Manual

User' s Manual
It is possible to print images to a PostScript™ printer. Pause the video on the desired image
and press the
SEARCH
The date and time of the paused images displays in the Last Played Image Time box.
Selecting Start will begin printing the image. When the DVR is connected to a multiplexer,
the camera channel of the printed image will not match the camera channel of the currently
displayed image on the monitor. To match the image, use the "tape mode" in the multiplexer.

Archiving

Backup
It is possible to archive video to an external USB-IDE hard disk drive. The archived images
can be viewed on computers running Microsoft Windows 98, ME or 2000. Refer to the
Appendix A — USB Hard Disk Drive Preparation for information on preparing the external
drive for archiving.
CAUTION: Do NOT disconnect the USB cable or the power from the
external drive while archiving video. If external drive is shut down or the
USB cable is disconnected while archiving, THE DVR SYSTEM MAY NOT
WORK NORMALLY OR THE FILE SYSTEM OF THE EXTERNAL DRIVE
COULD BE DAMAGED, and you will get an error message the next time
you try to archive. You will need to power down the DVR and restart it to
get rid of the error message.
drive has been corrupted, this error message cannot be dismissed. Even after
restarting the DVR it may automatically restart while preparing a backup. You
must recover the file system by using the recovery program, or you must
reformat the hard disk drive.
56
button. Select Print... from the menu, and the Print screen appears.
From
First
To Last
File Name
Start
Figure 51 — Backup screen
Once the file system of the USB-IDE hard disk
2002-03-11 02:29:38
2002-03-12 01:30:38
Close.
.