Backup; Load Default Setup; Clear All Data; Figure 44 - Backup Screen - ADEMCO AHDR1 User Manual

Backup

The Backup screen can be used to back up video to an external USB-IDE hard disk drive.
Backup
The default video segment to be backed up is from the first to last frame. However, you can
define how much video to back up by changing the start and end times and dates. You will
need to enter a file name before the video will back up. A virtual keyboard appears allowing
you to enter a file name. See Chapter 4 — Operation for archiving video to an external USB-
IDE hard disk drive.

Load Default Setup

Highlighting and selecting Load Default Setup will bring up screens asking you if you really
want to load default settings and confirm it with a password.
NOTE: Loading the Default Setup will not change the current time, time zone,
daylight saving time or network settings.

Clear All Data

Highlighting and selecting Clear All Data will bring up screens asking you if you really want
to clear all data and confirm it with a password.
CAUTION: Selecting Clear All Data will erase all recorded video.
From
First
Last
To
File Name
Start
Figure 44 — Backup screen
Single-Channel Digital Video Recorder
2002-03-11 02:29:38
2002-03-12 01:30:38
Close.
.
47