Network Setup; Figure 39 - Network Setup Screen - ADEMCO AHDR1 User Manual

User' s Manual
NOTE: Higher quality images require more storage space and will reduce the
recording capacity of the hard disk drive.
Highlight the box beside Beep and press the
set to On the DVR will beep any time an event occurs.
Highlight the box beside Alarm Out and press the
When set to On the DVR will activate the Alarm Out port.
Highlight the box beside Alarm In Type. Pressing the
(Normally Closed) and NO (Normally Open). Select the setting that matches the type of
alarm you are using.
You can save your changes by highlighting OK and pressing the
exits the screen without saving the changes.

Network Setup

NOTE: The network features can be set only on the Premium Model DVR. The
network features are "grayed" out and inactive on the non-Premium Model.
In the Network Setup screen you can set up the DVR for LAN and modem connections.
You will be able to make all the necessary settings for either type connection. Highlight
Network in the Main Menu and press the
Network Setup
42
Connection
Admin Password
User Password
OK
Figure 39 — Network Setup screen
button to toggle between On and Off. When
button to toggle between On and Off.
button toggles between NC
button.
LAN Setup...
******** .
******** .
.
Cancel
button. Selecting Cancel
.