Modem Setup; Figure 41 - Modem Setup Screen - ADEMCO AHDR1 User Manual

User' s Manual

Modem Setup

Modem Setup
Highlight the box beside Baud Rate and press the
from 300 to 115,200 appears.
Highlight the box beside Data Bit. Pressing the
formats.
Highlight the box beside Stop Bit. Pressing the
Highlight the box beside Parity and press the
select from None, Odd or Even parity.
You can save your changes and return to the Network Setup screen by highlighting OK and
pressing the button. Selecting Cancel exits the screen without saving the changes.
Highlight the box beside Admin Password and press the
appears. You will first be asked to enter the current password. Then you can enter a new
password; you will be asked to confirm the new password before it is accepted.
Highlight the box beside User Password and press the
appears. You will first be asked to enter the current password. Then you can enter a new
password; you will be asked to confirm the new password before it is accepted.
NOTE: These passwords are for network use. They are different from the
Admin and User passwords for the DVR itself.
44
Baud Rate
Date Bit
Stop Bit
Parity
OK Cancel.
Figure 41 — Modem Setup screen
57600 .
8 .
1 .
None .
button. A list of baud rates ranging
button toggles between 7 bit and 8 bit
button toggles between 1 bit and 2 bits.
button. A drop-down list appears. You can
button. A virtual keyboard
button. A virtual keyboard