Connecting The Monitor; Connecting Audio; Figure 7 - Video Output Connectors; Figure 8 - Audio In And Out Connectors - ADEMCO AHDR1 User Manual

Single-Channel Digital Video Recorder

Connecting the Monitor

Figure 7 — Video Output connectors
Connect the monitor to either the Video Out or SVHS Out connector.
NOTE: If your monitor has an SVHS input, use it because it will give you better
quality video display.
NOTE: The Video Out (BNC) and SVHS Out connections may be connected to
individual monitors for simultaneous operation.

Connecting Audio

NOTE: It is the user' s responsibility to determine if local laws and regulations
permit recording audio.
Figure 8 — Audio In and Out connectors
Your DVR can record audio. Connect the audio source to Audio In. Connect Audio Out to
your amplifier.
NOTE: The DVR does not have amplified audio output, therefore, a speaker
with a built-in amplifier is required. The audio input can be from an amplified
source or directly from a microphone.
13