Lan Setup; Figure 40 - Lan Setup Screen - ADEMCO AHDR1 User Manual

Highlight the box beside Connection. Press the
Modem.
Highlight the Setup... box and press the
LAN or Modem, the setup screens will differ.

LAN Setup

LAN Setup
NOTE: You will need to get the appropriate IP Address, Gateway and Subnet
Mask from your network administrator.
Change the numbers by highlighting them and using the Up and Down arrow buttons to
increase or decrease the number.
The factory default LAN settings are:
IP Address:
Gateway: 192.168.1.254
Subnet Mask: 255.255.255.0
You can save your changes and return to the Network Setup screen by highlighting OK and
button. Selecting Cancel exits the screen without saving the changes.
pressing the
IP Address
Gateway
Subnet Mask
Figure 40 — LAN Setup screen
192.168.1.129
Single-Channel Digital Video Recorder
button to toggle between LAN and
button. Depending on whether you selected
192.168.1.10
192.168.1.1
255.255.255.0
OK Cancel.
.
.
.
43