Connecting To The Usb Port; Connecting The Printer; Figure 12 - Usb Connector; Figure 13 - Printer Connector - ADEMCO AHDR1 User Manual

Single-Channel Digital Video Recorder

Connecting to the USB Port

Figure 12 — USB connector
A USB port is provided to connect external hard disk drives for archiving video. Position the
external hard disk drive close enough to the DVR so that you can make the cable connections,
usually less than 6 feet. Use the USB cable provided with the hard disk drive to connect it to
the DVR. See Chapter 4 — Operation for archiving video to an external USB-IDE hard disk
drive.
Connecting to the Printer
Figure 13 — Printer connector
You can print images from your DVR on PostScript™ printers. The DVR supports
PostScript™ 2.0 and higher. If you have a color PostScript™ printer, you can print color
images. Place the printer on a sturdy surface near enough to the DVR so that you will be able
to make the cable connections. Connect the DB-25P end of the cable to the DB-25S Printer
connector on the back of the DVR. Connect the other end of the cable to the printer. See
Chapter 4 — Operation for printing images.
NOTE: Only PostScript™ printers will work with the DVR.
NOTE: The DVR is not supplied with a printer cable, and many printers are not
supplied with cables. Make certain you have the correct cable when
purchasing the printer.
17