ADEMCO AHDR1 User Manual page 41

User' s Manual
You can program the DVR to record only during certain times based on time, day of the week,
and holidays. The smallest time segment you can use is 30 minutes. A blue rectangle
indicates the DVR is set to record during those 30 minutes. When there is no rectangle, the
DVR will not record during those 30 minutes.
There are several ways to set recording times:
You can highlight an individual block and toggle it On or Off by pressing the
—
button.
—
You can change a 30-minute segment for all days by placing the cursor on the
time line and pressing the
—
You can change an entire day by placing the cursor on the day of the week and
pressing the
— You can change the entire calendar by placing the cursor in the upper left-hand
box (above "S" and to the left of the time line) and pressing the
toggle the entire calendar On or Off.
NOTE: The Holiday (H) schedule applies to the dates you established as
holidays when setting Date/Time.
You can save your changes by highlighting OK and pressing the
exits the screen without saving the changes.
40
button to toggle the segment On or Off.
button to toggle the day On or Off.
button to
button. Selecting Cancel