Table of Contents
Advertisement
Highlight the box beside Data Bit. Pressing the
formats.
Highlight the box beside Stop Bit. Pressing the
Highlight the box beside Parity and press the
select from None, Odd or Even parity.
You can save your changes by highlighting OK and pressing the
exits the screen without saving the changes.
Configuring Recording Settings
Your DVR offers a variety of flexible recording modes. You can set it up to record all the
time or to only record events. It can be set up to continue recording once the hard disk drive
is full by recording over the oldest video, or you can set it up to alert you when the hard disk
is full and stop recording.
Record Mode Setup
Highlight Record Mode in the Main Menu and press the
Record Mode Setup
Highlight the box beside End Of Disk and press the
and Overwrite. When in the Stop mode, the DVR stops recording when the hard disk drive is
full. When in the Overwrite mode, the DVR continues recording when the hard disk drive is
full by overwriting the oldest video.
End Of Disk
On Disk Full :
Beep
Alarm Out
Mode
Trigger Out
OK
Figure 35 — Record Mode Setup screen
Single-Channel Digital Video Recorder
button toggles between 7 bit and 8 bit
button toggles between 1 bit and 2 bits.
button. A drop-down list appears. You can
button.
Stop
On
.
On
.
Simplex
Off
.
Cancel.
button. This toggles between Stop
button. Selecting Cancel
..
.
37
Advertisement
Table of Contents
