Wireless Access Points - versa VX-AP1WPro User Manual

Wireless Access Point User Guide

Wireless Access Points

The main panel displays a list of all Wireless Access Points found on the network. For each
Access Point, the following data is shown:
Server Name
IP address
MAC Address
IEEE Standard
FW Version
Description
Note: If the desired Wireless Access Point is not listed, check that the device is installed and
ON, then update the list by clicking the Refresh button.
Buttons
Refresh
Detail Info
Web Management
Set IP Address
Exit
Figure 6: Management utility Screen
The Server Name is shown on a sticker on the base of the device.
The IP address for the Wireless Access Point.
The hardware or physical address of the Wireless Access Point.
The wireless standard or standards used by the Wireless Access Point
(e.g. 802.11b, 802.11g)
The current Firmware version installed in the Wireless Access Point.
Any extra information for the Wireless Access Point, entered by the
administrator.
Click this button to update the Wireless Access Point device listing
after changing the name or IP Address.
When clicked, additional information about the selected Access
Point will be displayed.
Use this button to connect to the Wireless Access Point's Web-
based management interface.
Click this button if you want to change the IP Address of the
Wireless Access Point.
Exit the Management utility program by clicking this button.
10