Table of Contents
Advertisement
Wireless Access Point User Guide
Package Contents
The following items should be included:
•
Wireless Access Point
•
Antenna
If any of the above items are damaged or missing, please contact your dealer immediately.
Physical Details
Front Panel LEDs
On - Error condition.
Status
Off - Normal operation.
Blinking - During start up, and when the Firmware is being upgraded.
On - Normal operation.
Power
Off - No power
On - The LAN (Ethernet) port is active.
LAN
Off - No active connection on the LAN (Ethernet) port.
Flashing - Data is being transmitted or received via the corresponding
LAN (Ethernet) port.
On -
Wireless
LAN
Off - Error- Wireless connection is not available.
Flashing - Data is being transmitted or received via the Wireless access
point. Data includes "network traffic" as well as user data.
Show the Output Power level. When the signal strength of the strong, the
Signal
two light-all. When the signal strength of the weak, just a bright light.
Figure 2: Front Panel
Idle
4
Advertisement
Table of Contents
