versa VX-AP1WPro User Manual page 91

Data – Security System-WEP Screen
WEP
Data
Encryption
Authentication
Key Input
Key Value
Security System – WPA-PSK
Data – Security System-WPA-PSK Screen
WPA-PSK
Network Key
WPA Encryption
Select the desired option, and ensure your Wireless stations have the
same setting:
•
64 Bit Encryption - Keys are 10 Hex (5 ASCII) characters.
•
128 Bit Encryption - Keys are 26 Hex (13 ASCII) characters.
•
152 Bit Encryption - Keys are 32 Hex (16 ASCII) characters.
Normally, you can leave this at "Automatic", so that Wireless Stations
can use either method ("Open System" or "Shared Key".).
If you wish to use a particular method, select the appropriate value -
"Open System" or "Shared Key". All Wireless stations must then be set
to use the same method.
Select "Hex" or "ASCII" depending on your input method. (All keys
are converted to Hex, ASCII input is only for convenience.)
Enter the key values you wish to use. The default key, selected by the
radio button, is required. The other keys are optional. Other stations
must have matching key values.
Figure 68: Operation Mode-WPA-PSK Screen
Enter the key value. Data is encrypted using a 256Bit key derived
from this key. Other Wireless Stations must use the same key.
The encryption method is TKIP. Wireless Stations must also use
TKIP.
Other Settings & Features
87