versa VX-AP1WPro User Manual page 58

Wireless Access Point User Guide
Secondary Radius
Server Address
Radius Port
Shared Key
WEP Key Size
Dynamic WEP key
Key Exchange
Static WEP key
RADIUS Accounting
Update Report
every ...
Enter the name or IP address of the Secondary Radius Server on
your network.
Enter the port number used for connections to the Radius Server.
This is used for the Client Login on the Radius Server. Enter the
key value to match the value on the Radius Server.
Select the desired option.
•
64 Bit - data is encrypted, using the default key, before
being transmitted. You must enter at least the default
key. For 64 Bit Encryption, the key size is 5 chars
(ASCII) or 10 chars in HEX (0~9 and A~F).
•
128 Bit - data is encrypted, using the default key, before
being transmitted. You must enter at least the default
key. For 128 Bit Encryption, the key size is 13 chars
(ASCII) or 26 chars in HEX (0~9 and A~F).
•
156 Bit - data is encrypted, using the default key, before
being transmitted. You must enter at least the default
key. For 156 Bit Encryption, the key size is 16 chars
(ASCII) or 32 chars in HEX (0~9 and A~F).
If checked, the required WEP key is dynamically generated. This
may use EAP-TLS, PEAP, or another method, depending on the
methods supported by the client.
Enable this if you wish the Dynamic keys to be exchanged and
updated regularly. If enabled, enter the desired Key Lifetime.
If enabled, this uses EAP-MD5. You must enter the WEP key on
the WEP Key field below, and on each Wireless station.
The WEP Key Index must also match the key index used on
other Wireless stations.
Enable this if you want this Access Point to send accounting data
to the Radius Server.
If enabled, the port used by your Radius Server must be entered
in the Radius Accounting Port" field.
If Radius accounting is enabled, you can enable this and enter the
desired update interval. This Access Point will then send updates
according to the specified time period.
54