You can select System Status, LAN Settings, Wireless Settings, SNMP configuration
and System Tools on the left menu for details. Click Next to enter the wireless operation
mode setup page. Ceiling AP supports two working modes: Wireless AP (AP) and Bridge
(WDS). Select a working mode to configure the settings. For more details, please refer to the
following chapters.
3.2 Setup Wizard
This is a convenient tool that you can easily complete basic settings of ceiling AP. Click Next
in the first page and it will guide you through the settings.
On this page, you can select Wireless AP (AP) or Bridge (WDS) to adapt different wireless
access environment.
3.3 Wireless AP (AP) Mode
Select Wireless AP (AP) and click Next to enter the basic settings.
Enter proper information in this page
6