Chapter 1 Introduction; Features Of Your Wireless Access Point - versa VX-AP310N User Manual

Chapter 1
Introduction
This Chapter provides an overview of the Wireless Access Point's features
and capabilities.
Congratulations on the purchase of your new Wireless Access Point. The Wireless Access
Point links your Wireless Stations to your wired LAN. The Wireless stations and devices on
the wired LAN are then on the same network, and can communicate with each other without
regard for whether they are connected to the network via a Wireless or wired connection.

Features of your Wireless Access Point

The Wireless Access Point incorporates many advanced features, carefully designed to provide
sophisticated functions while being easy to use.
Standards Compliant.
IEEE802.11n draft 2.0 specifications for Wireless LANs.
Supports 11n Wireless Stations.
compatibility with the 802.11b standard, so 802.11n, 802.11b and 802.11g Wireless sta-
tions can be used simultaneously.
Bridge Mode Support.
necting to another Access Point. Both PTP (Point to Point) and PTMP (Point to Multi-
Point) Bridge modes are supported.
And you can even use both Bridge Mode and Access Point Mode simultaneously!
DHCP Client Support.
address to PCs and other devices upon request. The Wireless Access Point can act as a
DHCP Client, and obtain an IP address and related information from your existing DHPC
Server.
Figure 1: Wireless Access Point
The Wireless Access Point complies with the IEEE802.11g and
The 802.11n Draft standard provides for backward
The Wireless Access Point can operate in Bridge Mode, con-
Dynamic Host Configuration Protocol provides a dynamic IP
1
1