versa VX-AP1WPro User Manual page 43

Radius-based MAC authentication Screen
This screen will look different depending on the current security setting. If you have already
provided the address of your Radius server, you won't be prompted for it again. Otherwise,
you must enter the details of your Radius Server on this screen.
Data - Radius-based MAC Authentication Screen
Enable ...
Radius Server
Address
Radius Port
Client Login Name
Shared Key
WEP Key
WEP Key Index
Figure 23: Radius-based MAC Authentication Screen
Enable this if you wish to Radius-based MAC authentication.
If this field is visible, enter the name or IP address of the Radius
Server on your network.
If this field is visible, enter the port number used for connections to
the Radius Server.
If this field is visible, it displays the name used for the Client Login
on the Radius Server. This Login name must be created on the
Radius Server.
If this field is visible, it is used for the Client Login on the Radius
Server. Enter the key value to match the value on the Radius Server.
If this field is visible, it is for the WEP key used to encrypt data
transmissions to the Radius Server. Enter the desired key value in
HEX, and ensure the Radius Server has the same value.
If this field is visible, select the desired key index. Any value can be
used, provided it matches the value on the Radius Server.
Setup
39