Advanced Features - versa VX-AP1WPro User Manual

Advanced Features

•
Auto Configuration.
copying the configuration data from another Access Point. This feature is enabled by de-
fault.
•
Auto Update.
downloading and installing new firmware from your FTP server.
•
Command Line Interface.
configuration. This provides the possibility of creating scripts to perform common con-
figuration changes.
•
NetBIOS & WINS Support.
dows Internet Naming Service) allows the Wireless Access Point to easily fit into your
existing Windows network.
•
Radius Accounting Support.
accounting data on Wireless clients.
•
Syslog Support.
data to your Syslog Server.
•
SNMP Support.
you to use a SNMP program to manage the Wireless Access Point.
•
UAM Support. The Wireless Access Point supports UAM (Universal Access Method),
making it suitable for use in Internet cafes and other sites where user access time must be
accounted for.
•
WDS Support. Support for WDS (Wireless Distribution System) allows the Wireless
Access Point to act as a Wireless Bridge. Both Point-to-Point and Multi-Point Bridge
modes are supported.
•
QOS Support. With this feature, you can balance the load of AP which use the same
SSID in a certain area, and set the traffic threshold of each profile.
The Wireless Access Point can perform self-configuration by
The Wireless Access Point can automatically update its firmware, by
If desired, the command line interface (CLI) can be used for
Support for both NetBIOS broadcast and WINS (Win-
If you have a Radius Server, you can use it to provide
If you have a Syslog Server, the Wireless Access Point can send its log
SNMP (Simple Network Management Protocol) is supported, allowing
Introduction
3