Table of Contents
Advertisement
Wireless Access Point User Guide
Data - Security Profiles Screen
Profile
Profile List
Buttons
Isolation
Isolate all
Figure 20: Security Profiles Screen
All available profiles are listed. For each profile, the following data
is displayed:
•
*
If displayed before the name of the profile, this indicates the
profile is currently enabled. If not displayed, the profile is cur-
rently disabled.
•
Profile Name
The current profile name is displayed.
•
[SSID]
The current SSID associated with this profile.
•
Security System
The current security system (e.g. WPA-PSK ) is displayed.
•
[Band]
The Wireless Band (2.4 GHz, 5GHz) for this profile is dis-
played. Profiles may be assigned to either or both Wireless
Bands.
•
Enable - Enable the selected profile.
•
Configure - Change the settings for the selected profile.
•
Disable - Disable the selected profile.
If this option is selected, wireless clients using different profiles
(different SSIDs) are isolated from each other, so they will NOT be
able to communicate with each other. They will still be able to
communicate with other clients using the same profile, unless the
"Wireless Separation" setting on the "Advanced" screen has been
enabled.
34
Advertisement
Table of Contents
