Snmp - versa VX-AP1WPro User Manual

SNMP

SNMP (Simple Network Management Protocol) is only useful if you have a SNMP program
on your PC. To reach this screen, select SNMP in the Management section of the menu.
Data - SNMP Screen
General
Enable SNMP
SNMP Version
Read Only Com-
munity
Read/Write Com-
munity
Managers
Any Station
Only this station
Traps
Disable
Broadcast
Send to
Figure 64: SNMP Screen
Use this to enable or disable SNMP as required
Select the SNMP Version
Enter the string for read only community in which the data can be
read only but cannot be changed; usually we use either "Public" or
"Private".
Enter the string for read/write community in which the data can be
read or set changed, usually we use either "Public" or "Private".
The IP address of the manager station is not checked.
The IP address is checked, and must match the address you enter in
the IP address field provided.
If selected, you must enter the IP address of the required station.
Traps are not used.
Select this to have Traps broadcast on your network. This makes
them available to any PC.
Select this to have Trap messages sent to the specified PC only. If
selected, you must enter the IP Address of the desired PC.
Other Settings & Features
83