Changing The Vehicle-To-Vehicle Distance; Vehicle-To-Vehicle Distance Settings - Toyota Avalon Owner's Manual

234
4-5. Using the driving support systems
Changing the vehicle-to-vehicle distance (vehicle-to-vehicle dis-
tance control mode)
Pressing the switch changes the
vehicle-to-vehicle distance as fol-
lows:
Long
1
Medium
2
Short
3
The vehicle-to-vehicle distance is
set automatically to long mode
when the engine switch is turned to
IGNITION ON mode.
If a vehicle is running ahead of you, the preceding vehicle mark will also be
displayed.
Vehicle-to-vehicle distance settings (vehicle-to-vehicle distance
control mode)
Select a distance from the table below. Note that the distances shown
correspond to a vehicle speed of 80 km/h (50 mph). Vehicle-to-vehicle
distance increases/decreases in accordance with vehicle speed.
When the vehicle is stopped by system control, the vehicle stops at a
certain vehicle-to-vehicle distance depending on the situation.
AVALON_GE
AVALON_OM_General_OM41476E
Distance options
Long
Medium
Short
Preceding
vehicle mark
Vehicle-to-vehicle distance
Approximately 50 m (160 ft.)
Approximately 40 m (130 ft.)
Approximately 30 m (100 ft.)