Using The Network Features; Using The Lan (Optional); Using The Wlan - Getac F110 User Manual

Using the Network Features

Using the LAN (Optional)

To connect the network cable to the LAN module (if your model has the
feature), connect one end of the LAN cable to the RJ-45 connector on the
Tablet PC and the other end to the network hub.

Using the WLAN

The WLAN (Wireless Local Area Network) module supports IEEE 802.11ac,
compatible with 802.11a/b/g/n.
Turning On/Off the WLAN Radio
To turn on the WLAN radio:
1. Make sure that the Airplane mode is switched off. You can control the
Airplane mode using one of the below methods.
•
Use the Airplane Mode button in the OSD Control Panel.
•
For Windows 8
Settings  Network  Airplane mode. Slide the Airplane mode
switch to the Off position.
2. If you have previously turned off the WLAN radio, use one of the below
methods to turn it on.
•
For Windows 8
Change PC Settings  Network  Airplane mode. Slide the Wi-Fi
switch to the On position.
•
For Windows 7: Use either Windows Mobility Center or Getac Quick
Bar. To open Getac Quick Bar, tap and hold the Getac Utility icon
: Open the Charms Bar, tap Settings  Change PC
: Open the Charms Bar of Windows. Tap Settings 
19