When And How To Use - Getac F110 User Manual

When and How to Use

NOTE:
The actual setting items on your model may differ from those described

in this chapter.
The availability of some setting items depends on the Windows version

your computer is running.
You need to run BIOS Setup Utility when:
You see an error message on the screen requesting you to run BIOS

Setup Utility.
You want to restore the factory default BIOS settings.

You want to modify some specific settings according to the hardware.

You want to modify some specific settings to optimize the system

performance.
To run BIOS Setup Utility:
Method 1 : During system startup when the logo screen appears, tap the
screen or press the Windows Logo button on your Tablet PC. In the pre-boot
menu that appears, select Setup Utility.
NOTE:
If you don't want any accidental tapping to invoke the pre-boot menu,

you can disable this method by setting the "Screen Tapping for Boot
Options" item in the BIOS Setup Utility.
For Windows 8 models, the time period in which you can use the above

method is extremely short. You can use the other method as described
below.
Method 2 (for Windows 8 models only): Open the Charms Bar of Windows.
Tap Settings  Change PC Settings  Update and recovery  Recovery.
Under Advanced startup, tap Restart now. In the boot options menu, tap
Troubleshoot  Advanced options  UEFI Firmware Settings. Tap Restart.
Method 2 (for Windows 7 models only) : If a keyboard is connected, press the
F2 key when the prompt ("Press F2 for System Utilities") appears at the
bottom left corner of the screen during system startup.
43