Getac F110 User Manual page 37

2. Pull the ribbon strip to lift the battery pack off the compartment.
Ribbon strip
3. Fit another battery pack into place. Note the orientation of the battery
pack. Hold the battery pack at an angle and insert its small tabs to the
corresponding notches in the battery compartment. Then, lift the yellow
protection sheet in the battery compartment and plug the battery
connector.
4. Hold the battery cover at an angle and insert the cover's small tabs to the
corresponding notches on the Tablet PC; then close the cover. Press the
four small dots (

latch ( ) (
position ( ) (
Battery 1
Battery 2

) so that the cover clicks into place. Engage the cover
) and slide the two small locks inward to the locked

).
32
Ribbon strip