Display Problems; Hardware Device Problems - Getac F110 User Manual

Display Problems

Nothing appears on the screen.
During operation, the screen may automatically turn off as a result of

power management. Press any key to see if the screen comes back.
The brightness level might be too low. Increase the brightness.

The characters on the screen are dim.
Adjust the brightness and/or contrast.

The display brightness cannot be increased.
As a protection, the display brightness will be fixed at a low level when

the surrounding temperature is too high or too low. It is not a
malfunction in this situation.
Bad dots appear on the display at all times.
A small number of missing, discolored, or bright dots on the screen are

an intrinsic characteristic of TFT LCD technology. It is not regarded as a
LCD defect.
Clouding (or called "mura") happens on the screen when you exert
forces on the left or right side of the LCD frame.
This is a normal phenomenon, not a defect.


Hardware Device Problems

The Tablet PC does not recognize a newly installed device.
The device may not be correctly configured in the BIOS Setup program.

Run the BIOS Setup program to identify the new type.
Make sure if any device driver needs to be installed. (Refer to the

documentation that came with the device.)
Make sure if the device needs any jumper or switch settings. (Refer to the

documentation that came with the device.)
Check the cables or power cords for correct connections.

66