BASIC OPERATION
First, open the cassette cover and load the material to use. Then, close the
cassette cover and turn the power supply ON.
If any previous document has been remained in the
[INPUT screen], the right screen appears.
Press
key, select "INIT." and press ENTER .
▲/▼
If not, [PRINTED MATERIAL setting screen] appears.
[PRINTED MATERIAL setting screen] appears.
Press
key, set "PRINTED MATERIAL" and
▲/▼/ /
"SIZE."
After the setting, press ENTER , and then [INPUT
screen] appears.
▲/▼ key: "MATERIAL" , "SIZE"
/
key: "MATERIAL" ・・・ "TAPE", "GENERIC TUBE", "MAX TUBE"
"SIZE" ・・・・・・・・ "GENERIC TUBE" and "MAX TUBE"
Note: While selecting "MAX TUBE," 2.5 and 5.5 as "SIZE" cannot be selected.
Important:
You have to turn the machine off when you are changing tube or tape.
Quick Start
"TAPE"=5 , 9 , 12
Doc:
Sidan/ Page:
F I L E
B E I N G
I N I T I .
C O N T I N U E
[ P R I N T E D
M A T E R I A L ]
M A T E R I A L =
M A X
S I Z E =
= 2.5 , 3.2 , 3.6 , 4.2 , 5.2 , 5.5
MK9-M-04-02
27
I N P U T
T U B E
3 . 2