Ink Ribbon - Partex ProMark MK9 Quick Start Manual

Ink ribbon

1. Hold the ink ribbon cassette as
illustrated below and load it in the
machine. Then, to prevent it from
floating, press it.
● Make sure that the ribbon is not slack.
● If the ink ribbon cassette is not set well,
turns the shaft.
3. Turn down the head release lever
(green).
4. Close the cassette cover until it
clicks.
Quick Start
The tube/profile has been loaded.
Doc:
MK9-M-04-02
25
Sidan/ Page:
Proper loading
Check the slack.
Tube/Profile