Y-Adjustment - Partex ProMark MK9 Quick Start Manual

Y-ADJUSTMENT

1. Turn off the power.
2. Press down the SHIFT + T keys, turn on the power.
3. Use the arrow keys and select 2:SELECT
4. Use the arrow keys and select 7:PRINT
5. Press down Y key and change the value by using the arrow keys.
Press ENTER when you are done.
Adjustable range is between -0,32mm to +0,32mm.
TEXT
6. If you have confirmed your adjustment by using ENTER , then press the
ESC key so that you can read 1:AUTO, 2:SELECT in the display.
7. Turn of the power and start the machine the normal way.
Quick Start
-Y
+Y
Doc:
MK9-M-04-02
32
Sidan/ Page: